At Fingercheck, we provide a range of time clocks to suit your specific requirements. Our time clocks are designed for convenience, as they are ready to use as soon as you plug them in and connect them to your network.
To order time clocks from Fingercheck, simply visit our website and navigate to Setup > Company > Clock Management. Alternatively, you can place an order through our Service Desk under the "Order Modern Time Clocks" section.
For detailed instructions on how to order a time clock from Fingercheck, please refer to our helpful guide titled "How to Order a Time Clock."
Please note: We kindly request that you don't access the time clock's System Settings and reset it. Our time clocks are programmed to connect seamlessly with Fingercheck. Resetting the time clock through the System Settings may result in Fingercheck losing access to the clock, potentially limiting our ability to provide optimal service for your account.
This article will guide you through the steps to setting up, maintaining, and troubleshooting your TA200+/TA200+ Wi-Fi time clock.
Scan the QR code on your phone to continue reading this article and take it with you if your clock is in another room.
Time Clock Specifications
The TA200+ time clock has two models to meet your needs:
TA200+ time clock only has an ethernet connection.
TA200+ Wi-Fi time clock allows you to connect your time clock via Wi-Fi (2.4 GHz band).
The TA200+/TA200+ Wi-Fi time clock has the following specs to meet your time clock needs:
Transactions: 200,000 punches saved
Fingerprint: 10,000 employee fingerprints saved
Card: 10,000 cards can be assigned to employees. Time clocks come with five cards. Additional cards can be purchased separately.
Determine if You Have a FEM or FMM Time Clock
The TA200+/TA200+ Wi-Fi has two versions of time clocks. Both clocks function the same and offer the same exact features. The only difference is menu options may slightly differ.
FEM800: menu background is blue
FMM200: menu background is black
Each section of this article will identify when the time clock menu options have a different selection.
Time Clock Connection
Time clocks ordered from Fingercheck are ready to use as soon as the unit is plugged in and connected to your network. If you experience trouble connecting the time clock to your network, you need to contact your IT support to resolve any firewall or security issues.
TA200+ (ethernet)
TA200+ (ethernet)
Connecting the TA200+ time clock can be completed using the following steps:
Plug in the time clock.
From the time clock, click the MENU button > Communication.
Select Ethernet and press the OK button.
Use the arrow keys to the DHCP field and turn ON.
Press OK to save.
TA200+ Wi-Fi
TA200+ Wi-Fi
FEM800: menu background is blue
FEM800: menu background is blue
Connecting the TA200+ (FEM800) Wi-Fi time clock is easy and can be completed by following the steps below:
Press the menu button on your keyboard.
Go to Comm.
Select Wireless Network so that your clock can search available wireless networks.
Once networks have been pulled up, use the arrow buttons on the bottom-right corner of the clock to scroll to your network.
Press the Menu button to select your Network.
If you select OK, the Network list will refresh and your selection will not be saved.
FMM200: menu background is black
FMM200: menu background is black
Connecting the TA200+ (FEM800) Wi-Fi time clock is easy and can be completed by following the steps below:
Press the menu button on your keyboard.
Go to Comm.
Select Wireless Network so that your clock can search available wireless networks.
Once networks have been pulled up, use the arrow buttons on the bottom-right corner of the clock to scroll to your network.
Press the Menu button to select your Network.
If you select OK, the Network list will refresh and your selection will not be saved.
Add Employees to the Time Clock
Fingerprint
Check out Tips for a Better Fingerprint Recognition to get the highest quality fingerprints so that your employees can clock in and out seamlessly.
FEM800: Menu background is blue
FEM800: Menu background is blue
Connecting the TA200+ (FMM200) Wi-Fi time clock is easy and can be completed by following the steps below:
Press the menu button on your keyboard.
Go to Comm.
Go to Wireless LAN so that your clock can search available wireless networks.
Once networks have been pulled up, use the arrow buttons on the bottom-right corner of the clock to scroll to your network.
Press the Menu button to select your Network.
If you select OK, the Network list will refresh and your selection will not be saved.
Enter your Wi-Fi network information (which may be found on your router, or your computer).
Use the down arrow to work your way down to each field.
As you go along, use the arrows to highlight each field.
SSID: Network Name (selected in previous screen)
Network Type: most of the time you will select Infra.
AuthMode: most of the time you will select WPA2-PSK.
Encryp Mode: most of the time you will select AES.
IP Address: most of the time you will select DHCP
In the Password field, enter the password.
To begin typing, press the "*" asterisk button on your keyboard. This will pull up [English.]
Select the letter you'd like to press. For example, press 2 for a, b, or c. All the options for 2 will appear on the screen. Press the corresponding number to select the correct letter. For example, for the lowercase "a," you would press "0." For lowercase 'b" you would press "1," and so on. To enter a number, press ESC for the numeric keypad.
Once you've entered all your information, restart your time clock.
Once your clock is up and running again, it should pick up the IP address automatically and be connected to Fingercheck.
FMM200: Menu background is black
FMM200: Menu background is black
Please note the clock shown in the pictures is not the TA200+/TA200+ Wi-Fi clock, but the software shows the correct features and menu selection.
A Fingerprint Enroller will need to be present and press the Menu button on the time clock.
Using the arrow buttons, select Usr Mgmt, and press the OK button.
Using the arrow buttons, select All Users, and press OK.
Using the arrow buttons, scroll down to the employee you want to enroll fingerprints for, and press OK.
Select Edit and press OK.
Using the arrows, scroll down to Fingerprints, and press OK.
Select the number of the finger you want to enroll on the keypad, and press OK.
Scan your fingerprint on the scanner three times. On the screen there is a quality indicator, try to have It somewhere above ~70.
After the third time, a green circle appears on the fingerprint that was scanned.
Use the M/OK and ESC keys to save all changes and exit the menus to return to the main screen.
Card
We recommend you add the card number under the employee’s profile in Fingercheck before having the employee register on the time clock.
Cards assigned via the time clock will not sync to the employee’s profile in Fingercheck.
Log in to your Fingercheck account as an Administrator.
Click the EMPLOYEES tab, and click the employee's number to open their profile.
Under Personal, click Clock Info.
Click the Edit icon (pencil) for the Details section.
Enter the employee’s assigned Card Number to be used when clocking in.
Click Save.
An Admin will need to be with the employee at the clock to register the employee’s assigned card number.
Admin will need to go into Menu > Manage User.
Select your employee.
Select Edit.
Select Enroll card.
Place the employee’s finger on the sensor
Press it and then remove it.
You will have to repeat steps 5 and 6 three times in order to register a successful fingerprint.
Press ESC twice.
Press OK when you are prompted to save the fingerprint.
Passcode
Log in to your Fingercheck account as an Administrator.
Click the EMPLOYEES tab, and click the employee's number to open their profile.
Under Personal, click Clock Info.
Click the Edit icon (pencil) for the Details section.
Enter the employee’s Clock Password (8-Digits) to be used when clocking in.
Click Save.
Provide the employee with their Clock Number found in the Personal page of their employee profile, and the Clock Password so they can clock in at the time clock terminal.
Tips to Try if Employees Aren't Showing Up on a Time Clock
If you see that employees are not showing up on the time clock, even though you added them to Fingercheck, check the items below. If you can't resolve the issue, contact Fingercheck Support, and they can help you immediately.
Tip 1: Verify that your employees have their own employee clock number
Log in to Fingercheck as an Administrator.
Click the EMPLOYEES tab, and click the employee's number to open their profile.
The Personal section appears.If the Clock Number field is empty, enter a number of your choosing, or enter a question mark to auto-generate a number.
Click Save.
Tip 2: Resend your employees to the clock
On the EMPLOYEES tab, select the employees you want to send to the clock.
Click the Quick Actions menu (hamburger icon), and select Send Employees To Clock.
Select the clock, and click Send.
Tip 3: Make sure that your clock is connected to the internet
Time Clock Map
Map a clock to a job
If you have employees working different jobs, it can be helpful to set up designated time clocks that are each mapped to a specific job. Then, employees can easily get into the routine of automatically going to a particular clock to punch in and out.
Log in to Fingercheck as an Administrator.
Go to the SETUP tab > Clock Management (under the Company heading).
Select the clock terminal you want to map to the job.
The Terminal Information section appears.
From the Clock Mapped To drop-down, select Job Code.
From the Clock Mapped to Code drop-down list, select the job code you want the clock mapped to.
All the job codes you have created are listed.
Click Save.
Send jobs to a clock
Log in to Fingercheck as an Administrator.
Select SETUP > Company > Clock Management.
Click the Pencil icon to access the clock.
From the dropdown menu Workcode Option select JobCode.
Click Save.
Click the Quick Actions button (hamburger icon) in the top right > Sync Work Codes
Select Sync Work Codes.
Jobs must have numeric values as the code in order to be synced to the clock.
Time Clock Sync
Sync this clock with another clock
Log in to Fingercheck as an Administrator.
Select SETUP > Company > Clock Management.
Click the Pencil icon to access the clock.
In the Terminal Information section, click the Quick Actions button (hamburger icon), and select Sync Clock.
Select all the clocks you would like to sync, and click Sync Clocks.
In the confirmation pop-up message, click OK.
The page will reload, and your clocks should all be synced. The data and fingerprints will be shared between all your clock terminals.
Auto sync fingerprints to the clock
Log in to Fingercheck as an Administrator.
Select the SETUP > System > Scheduled Tasks.
Click Add.
Complete the following fields:
Code: An abbreviated name for the task.
Description: A short descriptive name. Together, the Code and Description fields make up the full name as displayed in other areas of Fingercheck.
Job Status: Leave as Scheduled.
In the Task Actions section, click Add.
From the Job Action drop-down list, select SYCL – Sync Clock Fingerprints.
Leave the Sequence field empty.
In the DaysFromHireDate field, enter the number of days to include in the clock sync.
By entering a negative number, you can tell the system to include all employees added to the system over the last selected number of days. For example, if you enter -7, the system syncs all employees that have been added within the past 7 days next.Click Apply.
In the Task Triggers section, click Add.
In the Start Date field, enter the date you want to start the task.
In the End Date field, enter a date far into the future (such as 1/1/2099) so that the trigger continues to run.
From the Trigger Type drop-down list, select Weekly, and select the day of the week for the job to run.
Click Apply.
Click Save.
Note: Fingerprints are synced only with the time clocks that an employee has been “sent” to during the employee setup process. This ensures that only the time clocks that you want an employee to access are synced with the fingerprint data.
Sync employees and fingerprints to the clock
Syncing existing employees and fingerprints with a new clock is a simple process within Fingercheck. This allows you to download employees and fingerprints from one time clock to upload to another clock.
Log in to Fingercheck as an Administrator.
Select the EMPLOYEES tab.
Select the checkboxes for each employee who you want to sync with the clock.
Click the Quick Actions button (hamburger icon), and select Download Biometrics.
In the pop-up window that appears, select the clocks you want to download the fingerprints from, and click Download.
Send the employees to the clocks:
Make sure the same employees are selected.
Click the Quick Actions button (hamburger icon), and select Send Employees to Clock.
In the pop-up window that appears, select the clocks you want to send the information to, and click Send.
In the confirmation pop-up window, click OK.
Send the fingerprints to the clock:
Click the Quick Actions button (hamburger icon), and select Send Biometrics to Clock.
In the pop-up window that appears, select the clocks you want to send the information to, and click Send.
In the confirmation pop-up window, click OK.
Setup Notification if the Time Clock Goes Offline
Fingercheck is hosted on the cloud, requiring a connection must be established between your clocks and our servers for your clock to be able to upload your punch data successfully. This connection is why we designed an automatic alert system to notify you whenever your clock is offline for more than an hour. While your clock is offline, your employees can still punch in and out uninterrupted. Their punches will be uploaded after the connection is repaired.
Log in to Fingercheck as an Administrator.
Go to the SETUP tab > System > Scheduled Tasks.
Click Add.
In the Scheduled Task Information section:
In the Code field, enter an abbreviated name for the task.
In the Description field, enter a short descriptive name.
Together, the Code and Description fields make up the full name as displayed in other areas of Fingercheck.
Leave the Job Status field set to Scheduled.
In the Task Actions section, define the task:
Click Add.
From the Job Action drop-down list, select CLNO - Clock Notification Offline.
Leave the Sequence field at 0.
In the MailTo field, enter the email address of the person who should receive the notification.
Leave the Days field at 0.
Click Apply.
In the Task Triggers section, define how often the task is executed.
Click Add.
In the Start Date field, enter the date you want to start the task.
In the End Date field, enter a date far into the future (such as 1/1/2099) so that the trigger continues to run.
In the Time field, enter the time of day when you want the notification sent.
From the Trigger Type drop-down list, select Daily, and select the day of the week for the job to run.
If you want to be notified more frequently, you can create multiple triggers to execute the notification in the morning, afternoon, and evening (changing the Time field for each trigger).In the Days field, enter 1 so that the task is triggered every day.
Click Apply.
Click Save to save the scheduled task.
Configure the Time Clock Auto Transfer Feature
Employees punching in using our biometric time clocks no longer have to go through the added step of pressing Transfer to transfer punches from one job to the next. Now, a punch into a new job will automatically transfer over.
The TA200+/TA200+ Wi-Fi (FEM800) clocks will automatically count the first punch of the day as an "In" punch. The next time they place their finger to punch, if they select a different job to punch into, they are automatically punched out for the previous job they were doing.
Log in to Fingercheck as an Administrator.
Go to the SETUP tab > Company > Clock Management.
Select the clock terminal you want to set up an automatic transfer for.
Select the Use Automatic Transfer checkbox.
Click Save.
Configure your clock settings.
On the clock, press the Menu button.
Using the keyboard arrows, navigate to System, and press OK.
Navigate to Keyboard, and press OK.
Press OK for the F1 Status Key.
Using the arrows, enter 4 next to the No. field.
The number 4 is denoted as transfer within Fingercheck.
Optionally, you can enter transfer in the Name field.
Press the down arrow button to exit the fields and press OK to save your work.
The transfer button has been saved and you are done.
You can repeat this process for all of your TA200+/TA200+ Wi-Fi (FEM800) clock terminals.
Enable Auto-Power on Your Time Clock
The TA200+/TA200+ Wi-Fi (FEM800) time clock allows you to Enable the Auto-Power feature which prevents it from powering off. This setting saves a lot of time, and once enabled, allows your employees to punch in and out at any time, day or night.
Use the steps below to enable the Auto-Power feature:
Press the Menu button.
Use the right arrow to navigate to System and press OK.
Use the arrows to navigate to Misc. Set and press OK.
Use the down arrow to navigate to the AUTO POWER field and press OK.
Use the right arrow to change the field from Off to On and press OK.
Press OK to save your changes.
Check the Daylight Saving Time Mode
You can check the Daylight Saving Time (DST) mode on your Fingercheck clocks and change the mode as needed.
The pictures shown below may not match your clock exactly, but they will give you context to follow the steps.
Press the Menu button on your keyboard.
Use the arrow keys to navigate to System.
Press the M/OK button.
Go to Date and Time.
Navigate to Daylight Saving Setup.
Set the start of Daylight Saving Time:
The start month should be 3 to represent March.
The start week should be 2.
The start day should be Sunday.
The time should be 2 AM.
The end month should be 11 to represent November.
The end week should be 1.
Set the end of Daylight Saving Time:
The end week should be 1.
The end day should be Sunday.
The time should be 2 AM.
The start month should be 11 to represent November.
User Management
User roles
It is important to designate users because employees can make changes to the time clock until a user is assigned with a role of Supervisor or Fingerprint Enroller.
Employee
Employees can use the time clock to punch in and out. They will not have access to the clock’s settings to make changes once an individual has been assigned with a role as a Supervisor or Fingerprint Enroller.
Fingerprint Enroller
Employees can use the time clock to punch in and out. They will not have access to the clock’s settings to make changes once an individual has been assigned with a role as a Supervisor or Fingerprint Enroller.
Administrators can classify specific employees as fingerprint "enrollers" within a designated time clock. This user can lock and unlock designated time clocks, and enroll employee fingerprints to the designated time clock.
Log in to your Fingercheck account as an Administrator.
Click the EMPLOYEES tab, and click the employee's number to open their profile.
Under Personal, click Clock Info.
Click the Edit icon (pencil) for the Details section.
Click the Is Enroller checkbox.
Click Save.
Click the Quick Actions button (hamburger icon), and select Send Employee to Clock.
In the pop-up window that appears, select the clocks, and click Send.
Supervisor
An individual with a role of Supervisor will be able to enroll employee fingerprints, and access settings and all menu options. They can make changes to menu selections and clock operations.
Remove terminated employees from the time clock
We recommend in most situations to not delete employee information, as those records could be relevant in case of an audit, or if you just need to go figuring out what the employee did in the past.
However, you can safely delete the employee's name within your time clock's roster. This record isn't tied directly to any data, so nothing important is lost. Until you delete the employee's name, they can still punch in and out.
How to remove terminated employees from the time clock
Log in to Fingercheck as Administrator.
Click to the SETUP tab > Company > Clock Management.
Click the edit icon (pencil) for the clock you would like to make changes to.
If you're unsure which clock to select, you can check by comparing the serial number (located on the back of the clock) with the number in the Code column.
On the Terminal Information page, click on the Actions icon (hamburger icon) in the upper-right corner, and select Delete Terminated Employees.
Replace and Deactivate Time Clocks
If you have to replace the TA200+/TA200+ Wi-Fi time clock, you will need to purchase the replacement from Fingercheck. Time clocks sold by Fingercheck are programmed to connect seamlessly with our software.
If you need to make the TA200+/TA200+ Wi-Fi time clock inactive, please contact Fingercheck Support to deactivate your time clock.
Once Fingercheck marks a time clock inactive under your account, the employee punches will no longer be recorded.
Thank you for using Fingercheck. Use the chat feature below or call our team at 1-800-610-9501 if you have any questions about the subject of this article.