At Fingercheck, we provide a range of time clocks to suit your specific requirements. Our time clocks are designed for convenience, as they are ready to use as soon as you plug them in and connect them to your network.
To order time clocks from Fingercheck, simply visit our website and navigate to Setup > Company > Clock Management. Alternatively, you can place an order through our Service Desk under the "Order Modern Time Clocks" section.
For detailed instructions on how to order a time clock from Fingercheck, please refer to our helpful guide titled "How to Order a Time Clock."
Please note: We kindly request that you don't access the time clock's System Settings and reset it. Our time clocks are programmed to connect seamlessly with Fingercheck. Resetting the time clock through the System Settings may result in Fingercheck losing access to the clock, potentially limiting our ability to provide optimal service for your account.
This article will guide you through the steps to setting up, maintaining, and troubleshooting your TA100C/AC100C time clock.
Scan the QR code on your phone to continue reading this article and take it with you if your clock is in another room.
Time Clock Specifications
The TA100C/AC100C time clock uses an Ethernet connection.
The TA100C/AC100C time clock has the following specs to meet your time clock needs:
Transactions: 200,000 punches saved
Fingerprint: 8,000 employee fingerprints saved
Determine if You Have a FEM or FMM Time Clock
The TA100C/AC100C has two versions of time clocks. Both clocks function the same and offer the same exact features. The only difference is menu options may slightly differ.
FEM800: menu background is blue
FMM200: menu background is black
Each section of this article will identify when the time clock menu options have a different selection.
Time Clock Connection
Time clocks ordered from Fingercheck are ready to use as soon as the unit is plugged in and connected to your network. If you experience trouble connecting the time clock to your network, you need to contact your IT support to resolve any firewall or security issues.
The time clock TA200+ model is used to show the menu options. Connecting the TA100C/AC100C time clock can be completed using the following steps:
Make sure your Dynamic Host Configuration Protocol (DHCP) is on.
This is a protocol that automatically assigns an IP address to every device that connects to your network.From the time clock go to Menu > Communication
Select Ethernet
Turn the DHCP on and then save.
If the first steps don't work, check the cable of your router and change the Ethernet port your device is plugged into on the router side.
Add Employees to the Time Clock
Fingerprint
Check out Tips for a Better Fingerprint Recognition to get the highest quality fingerprints so that your employees can clock in and out seamlessly.
FEM800: Menu background is blue
FEM800: Menu background is blue
Please note the clock shown in the pictures is not the TA100C/AC100C clock, but the software shows the correct features and menu selection.
A Fingerprint Enroller will need to go into the Menu > Manage User and click OK.
Select your User Mgmt and click OK.
Select Manage User.
You'll see a list of employees.
Select an employee by either of the following methods:
Use the arrows to scroll down the employee list to find the user you want to enroll fingerprints for and press OK.
OR
Press on the Menu button and select Search User.
Using the arrow buttons, select Enroll FP and press OK.
Now it's time to enroll the employee's fingerprints. You should see this screen.
Enroll the employee's fingerprints.
The screen should look like this:
You'll see a list of employees.
Select an employee by either of the following methods:
Use the arrows to scroll down the employee list to find the user you want to enroll fingerprints for and press OK.
OR
Press on the Menu button and select Search User.
Using the arrow buttons, select Enroll FP and press OK.
Now it's time to enroll the employee's fingerprints. You should see this screen.
Enroll the employee's fingerprints.
The screen should look like this:
Place the employee's finger over the fingerprint pad and remove it when the machine beeps.
You should see the first of the three boxes on the screen fill with green. The bottom of the screen will let you know what press you're up to.
Press their finger again for a second reading.
Press their finger again for a third reading.
If you are successful, you should see all three boxes filled with green and a green checkmark.
Press the Esc button twice.
FMM200: Menu background is black
FMM200: Menu background is black
A Fingerprint Enroller will need to be present and press the Menu button on the time clock.
Using the arrow buttons, select Usr Mgmt, and press the OK button.
Using the arrow buttons, select All Users, and press OK.
Using the arrow buttons, scroll down to the employee you want to enroll fingerprints for, and press OK.
Select Edit and press OK.
Using the arrows, scroll down to Fingerprints, and press OK.
Select the number of the finger you want to enroll on the keypad, and press OK.
Scan your fingerprint on the scanner three times. On the screen there is a quality indicator, try to have It somewhere above ~70.
After the third time, a green circle appears on the fingerprint that was scanned.
Use the M/OK and ESC keys to save all changes and exit the menus to return to the main screen.
Passcode
Log in to your Fingercheck account as an Administrator.
Click the EMPLOYEES tab, and click the employee's number to open their profile.
Under Personal, click Clock Info.
Click the Edit icon (pencil) for the Details section.
Enter the employee’s Clock Password (8-Digits) to be used when clocking in.
Click Save.
Provide the employee with their Clock Number found in the Personal page of their employee profile, and the Clock Password so they can clock in at the time clock terminal.
Tips to try if employees are not showing on time clock
If you see that employees are not showing up on the time clock, even though you added them to Fingercheck, check the items below. If you can't resolve the issue, contact Fingercheck Support, and they can help you immediately.
Tip 1: Verify that your employees have their own employee clock number
Log in to Fingercheck as an Administrator.
Click the EMPLOYEES tab, and click the employee's number to open their profile.
The Personal section appears.If the Clock Number field is empty, enter a number of your choosing, or enter a question mark to auto-generate a number.
Click Save.
Tip 2: Resend your employees to the clock
On the EMPLOYEES tab, select the employees you want to send to the clock.
Click the Quick Actions menu (hamburger icon), and select Send Employees To Clock.
Select the clock, and click Send.
Tip 3: Make sure that your clock is connected to the internet
Time Clock Map
Map a clock to a job
If you have employees working different jobs, it can be helpful to set up designated time clocks that are each mapped to a specific job. Then, employees can easily get into the routine of automatically going to a particular clock to punch in and out.
Log in to Fingercheck as an Administrator.
Go to the SETUP tab > Clock Management (under the Company heading).
Select the clock terminal you want to send jobs to.
The Terminal Information section appears.
From the Clock Mapped To drop-down, select Job Code.
All the job codes you have created are listed.
From the Clock Mapped to Code drop-down list, and select the job code you want the clock mapped to.
Click Save.
Send jobs to a clock
Log in to Fingercheck as an Administrator.
Select SETUP > Company > Clock Management.
Click the Pencil icon to access the clock.
From the dropdown menu Workcode Option select JobCode.
Click Save.
Click the Quick Actions button (hamburger icon) in the top right > Sync Work Codes
Select Sync Work Codes.
Time Clock Sync
Sync this clock with another clock
Log in to Fingercheck as an Administrator.
Select SETUP > Company > Clock Management.
Click the Pencil icon to access the clock.
In the Terminal Information section, click the Quick Actions button (hamburger icon), and select Sync Clock.
Select all the clocks you would like to sync, and click Sync Clocks.
In the confirmation pop-up message, click OK.
The page will reload, and your clocks should all be synced. The data and fingerprints will be shared between all your clock terminals.
Auto sync fingerprints to the clock
Auto sync fingerprints to the clock
Log in to Fingercheck as an Administrator.
Select the SETUP > System > Scheduled Tasks.
Click Add.
Complete the following fields:
Code: An abbreviated name for the task.
Description: A short descriptive name. Together, the Code and Description fields make up the full name as displayed in other areas of Fingercheck.
Job Status: Leave as Scheduled.
In the Task Actions section, click Add.
From the Job Action drop-down list, select SYCL – Sync Clock Fingerprints.
Leave the Sequence field empty.
In the DaysFromHireDate field, enter the number of days to include in the clock sync.
By entering a negative number, you can tell the system to include all employees added to the system over the last selected number of days. For example, if you enter -7, the system syncs all employees that have been added within the past 7 days next.Click Apply.
In the Task Triggers section, click Add.
In the Start Date field, enter the date you want to start the task.
In the End Date field, enter a date far into the future (such as 1/1/2099) so that the trigger continues to run.
From the Trigger Type drop-down list, select Weekly, and select the day of the week for the job to run.
Click Apply.
Click Save.
Note: Fingerprints are synced only with the time clocks that an employee has been “sent” to during the employee setup process. This ensures that only the time clocks that you want an employee to access are synced with the fingerprint data.
Sync employees and fingerprints to the clock
Syncing existing employees and fingerprints with a new clock is a simple process within Fingercheck. This allows you to download employees and fingerprints from one time clock to upload to another clock.
Log in to Fingercheck as an Administrator.
Select the EMPLOYEES tab.
Select the checkboxes for each employee who you want to sync with the clock.
Click the Quick Actions button (hamburger icon), and select Download Biometrics.
In the pop-up window that appears, select the clocks you want to download the fingerprints from, and click Download.
Send the employees to the clocks:
Make sure the same employees are selected.
Click the Quick Actions button (hamburger icon), and select Send Employees to Clock.
In the pop-up window that appears, select the clocks you want to send the information to, and click Send.
In the confirmation pop-up window, click OK.
Send the fingerprints to the clock:
Click the Quick Actions button (hamburger icon), and select Send Biometrics to Clock.
In the pop-up window that appears, select the clocks you want to send the information to, and click Send.
In the confirmation pop-up window, click OK.
Setup notification if the time clock goes offline
Fingercheck is hosted on the cloud, requiring a connection must be established between your clocks and our servers for your clock to be able to upload your punch data successfully. This connection is why we designed an automatic alert system to notify you whenever your clock is offline for more than an hour. While your clock is offline, your employees can still punch in and out uninterrupted. Their punches will be uploaded after the connection is repaired.
Log in to Fingercheck as an Administrator.
Go to the SETUP tab > System > Scheduled Tasks.
Click Add.
In the Scheduled Task Information section:
In the Code field, enter an abbreviated name for the task.
In the Description field, enter a short descriptive name.
Together, the Code and Description fields make up the full name as displayed in other areas of Fingercheck.
Leave the Job Status field set to Scheduled.
In the Task Actions section, define the task:
Click Add.
From the Job Action drop-down list, select CLNO - Clock Notification Offline.
Leave the Sequence field at 0.
In the MailTo field, enter the email address of the person who should receive the notification.
Leave the Days field at 0.
Click Apply.
In the Task Triggers section, define how often the task is executed.
Click Add.
In the Start Date field, enter the date you want to start the task.
In the End Date field, enter a date far into the future (such as 1/1/2099) so that the trigger continues to run.
In the Time field, enter the time of day when you want the notification sent.
From the Trigger Type drop-down list, select Daily, and select the day of the week for the job to run.
If you want to be notified more frequently, you can create multiple triggers to execute the notification in the morning, afternoon, and evening (changing the Time field for each trigger).In the Days field, enter 1 so that the task is triggered every day.
Click Apply.
Click Save to save the scheduled task.
Enable Auto-Power on your time clock
Enabling the Auto-Power feature on your TA100C/AC100C time clock prevents it from powering off. This setting saves a lot of time, and once enabled, allows your employees to punch in and out at any time, day or night.
The steps below show the TA100C time clock, but the menu options are the same for both TA100C and AC100C clocks.
Press the Menu button.
Use the arrow buttons to navigate to System and press M/OK.
Use the arrows to navigate to Power Management and press M/OK.
Use the arrows to navigate to the AUTO POWER field and press M/OK.
Check the Daylight Saving Time Mode
The AC100C or TA100C clock, DST should already be preprogrammed on the clock, but you can use the procedure below to verify the setting
Press the Menu button on your keyboard.
Use the arrow keys to navigate to System.
Press the M/OK button.
Go to Date and Time.
Navigate to Daylight Saving Setup.
Set the start of Daylight Saving Time:
The start month should be 3 to represent March.
The start week should be 2.
The start day should be Sunday.
The time should be 2 AM.
The end month should be 11 to represent November.
The end week should be 1.
Set the end of Daylight Saving Time:
The end week should be 1.
The end day should be Sunday.
The time should be 2 AM.
The start month should be 11 to represent November.
User management
User roles
It is important to designate users because employees can make changes to the time clock until a user is assigned with a role of Supervisor or Fingerprint Enroller.
Employee
Employees can use the time clock to punch in and out. They will not have access to the clock’s settings to make changes once an individual has been assigned with a role as a Supervisor or Fingerprint Enroller.
Fingerprint Enroller
Employees can use the time clock to punch in and out. They will not have access to the clock’s settings to make changes once an individual has been assigned with a role as a Supervisor or Fingerprint Enroller.
Administrators can classify specific employees as fingerprint "enrollers" within a designated time clock. This user can lock and unlock designated time clocks, and enroll employee fingerprints to the designated time clock.
Log in to your Fingercheck account as an Administrator.
Click the EMPLOYEES tab, and click the employee's number to open their profile.
Under Personal, click Clock Info.
Click the Edit icon (pencil) for the Details section.
Click the Is Enroller checkbox.
Click Save.
Click the Quick Actions button (hamburger icon), and select Send Employee to Clock.
In the pop-up window that appears, select the clocks, and click Send.
Supervisor
An individual with a role of Supervisor will be able to enroll employee fingerprints, and access settings and all menu options. They can make changes to menu selections and clock operations.
Remove terminated employees from the time clock
We recommend in most situations to not delete employee information, as those records could be relevant in case of an audit, or if you just need to go figuring out what the employee did in the past.
However, you can safely delete the employee's name within your time clock's roster. This record isn't tied directly to any data, so nothing important is lost. Until you delete the employee's name, they can still punch in and out.
How to remove terminated employees from the time clock
Log in to Fingercheck as Administrator.
Click to the SETUP tab > Company > Clock Management.
Click the edit icon (pencil) for the clock you would like to make changes to.
If you're unsure which clock to select, you can check by comparing the serial number (located on the back of the clock) with the number in the Code column.
On the Terminal Information page, click on the Actions icon (hamburger icon) in the upper-right corner, and select Delete Terminated Employees.
Replace and deactivate time clocks
If you have to replace the TA100/AC100C time clock, you will need to purchase the replacement from Fingercheck. Time clocks sold by Fingercheck are programmed to connect seamlessly with our software.
If you need to make the TA100/AC100C time clock inactive, please contact Fingercheck Support to deactivate your time clock.
Once Fingercheck marks a time clock inactive under your account, the employee punches will no longer be recorded.
Thank you for using Fingercheck. Use the chat feature below or call our team at 1-800-610-9501 if you have any questions about the subject of this article.