If you have the newest version of our AC100C and TA103C time clocks, enrolling fingerprints works a little differently than with our original AC100Cs and TA103Cs. To begin using your new device as soon as possible, here are the steps to take to enroll your employees' fingerprints:

  • Press the "Menu" button on the time clock.

  • Using the arrow buttons, select "Usr Mgmt" and press the "OK" button.

  • Using the arrow buttons, select "All Users" and press the "OK" button.

  • Using the arrow buttons, scroll down to the employee you want to enroll fingerprints for and press the "OK" button.

  • Select "Edit" and press the "OK" button.

  • Using the arrows, scroll down to "Fingerprints" and press the "OK" button.

  • Select the number of the finger you want to enroll on the keypad, then press the "OK" button.

  • Scan your fingerprint on the scanner three times. On the screen there is a quality indicator, try to have It somewhere above ~70.

  • After the third time, there should be a green circle on the fingerprint that was scanned.

  • Use the M/OK and ESC keys to save all changes and exit the menus to return to the main screen.

Now you are done! You can have your employees start punching in and out on the clock.

Did this answer your question?